VACUUM TABLE ASSEMBLY

Here's all the info you will need to assemble a Black Box Vacuum solutions vacuum table kit on one of our routers.

 

Cut list I used for a 4 section vacuum table on an RTR-84

This setup uses the vacuum pump mounting kit, this kit is not needed to use the vacuum pump but it makes it so you can mount the vacuum pump to the table instead of sitting the pump on the floor. The pump is designed to be able to run sitting on the floor and does not need to be attached to the table but attaching it to the table allowed us to be able to move the table as an assembly with a forklift in the future if needed.
If you do not use the vacuum pump mounting kit, adjust the lengths of the cuts of your pvc tubes accordingly.  
Vacuum tube kit
Vacuum pump to manifold 
(Amount used)  - Tube length - Tube diameter 
(5) - 4''   - 3" tube 
(1) - 13'' - 3" tube      
(1) - 9''   - 3" tube
(1) - 12'' - 3" tube   
(1) - 17.5'' - 3" tube
(8) - 2'' - 2" tube      
(4) - 1.75'' - 2" tube  
(1) - 15'' 1/8 - 2" tube  
(1) - 18'' 7/8 - 2" tube  
(1) - 30'' 3/4 - 2" tube  
(1) - 45'' - 2" tube